2006 Dodge Ram Center Console Sub

[tha-grim]

I wish I would had taken pictures from the start of this but of course a few days in I decided to grab a camera anyways.. This is installing a 12" Orion HCCA in my center console of my 2006 Dodge Ram Quad Cab. Here are some photos maybe I took them early enough for everyone to see where I'm going with this project. I will take some better pictures today and upload them of the cupholder frame and the cupfolder in the daylight. I didn't finish it up until late last night. My plan is to foam the top and vinyl the box to match the seats that are in there.

http://desmond.imageshack.us/Himg98/scaled.php?server=98&filename=photo1lsz.jpg&res=landing
http://desmond.imageshack.us/Himg191/scaled.php?server=191&filename=photo2vvh.jpg&res=landing
http://desmond.imageshack.us/Himg821/scaled.php?server=821&filename=photo5bb.jpg&res=landing
http://desmond.imageshack.us/Himg59/scaled.php?server=59&filename=photo11ih.jpg&res=landing
http://desmond.imageshack.us/Himg341/scaled.php?server=341&filename=photo41yd.jpg&res=landing

[tha-grim]

Here are some better ones of the cupholder

http://desmond.imageshack.us/Himg716/scaled.php?server=716&filename=photo51i.jpg&res=landing
http://desmond.imageshack.us/Himg193/scaled.php?server=193&filename=photo52p.jpg&res=landing
http://desmond.imageshack.us/Himg839/scaled.php?server=839&filename=photo54i.jpg&res=landing
http://desmond.imageshack.us/Himg534/scaled.php?server=534&filename=photo53t.jpg&res=landing

[Jimi77]

Coming along nicely. How do you plan to finish the enclosure?

[tha-grim]

Coming along nicely. How do you plan to finish the enclosure?

I want to get some 1/2" dense foam and put it on the top where your elbow and arm would rest on the box, then I have some vinyl laying around the house that closely matches the seats in my truck im going to wrap it in that and hope it turns out good. I've never upholstered anything before so I'm still kinda stumped on how its going to wrap around all the edges smoothly

[Jimi77]

I want to get some 1/2" dense foam and put it on the top where your elbow and arm would rest on the box, then I have some vinyl laying around the house that closely matches the seats in my truck im going to wrap it in that and hope it turns out good. I've never upholstered anything before so I'm still kinda stumped on how its going to wrap around all the edges smoothly

Vinyl can be tough. You can pull the box and round off the corners and that will help.